Hand Pallet Truck Precautions

When pulling the Hand Pallet Truck, it is usually necessary to pull the finger control handle to the middle position, which is conducive to reducing the resilience of the small piston on the handle when moving the handle, and also protects the hydraulic seals and piston components, and extends the service life of the truck

▲ Hand Pallet Truck is strictly prohibited for people who are not familiar with the car and have not been trained to use it

▲ Manned operation is strictly prohibited

▲ Hand Pallet Truck is strictly prohibited to use in places with inclination to avoid rollover

▲ During the handling of the goods, others should be 600mm away from the fork

▲ Should pay attention to the center of gravity of the goods, avoid partial load and tilt,

▲ Hand Pallet Truck is strictly prohibited to lift the goods with a single fork to avoid rollover or damage to the fork

▲ No overload

▲ When lowering the fork, it is strictly prohibited to extend your hands and feet under the fork

▲ When the manual hydraulic car is not in use, it is recommended to empty the load and reduce the fork to the lowest position.

▲ Routine inspection every day, timely elimination of abnormal phenomena, do not use faulty cars, in order to extend the service life. If there is a fault, a professional should be asked to troubleshoot the fault, and if you want to replace the parts, the parts should be provided by the manufacturer. Add motor oil to each rotating joint every three months, pay special attention to the wheels and shafts not to be entangled in debris, and keep all wheels rotating lightly to meet safety requirements.

▲ Exhaust gas

Due to the inversion of the transport or pump body, air is likely to enter the hydraulic pump, which will cause the cargo pressure to not rise when the pressure is pressed during the rise. You can pull the top of the hand to the falling position, and move up and down several times to discharge air.

▲ Lubrication

Hand Pallet Truck is necessary to add lubricating oil to each part regularly to reduce wear, seal and prevent leakage.